[Home] [Download Catalog] [Contact Info]

 

STAINLESS STEEL WELD PAD KIT
( For Motor Dampening Bars )

Standard Features:
  • Material is 304 stainless steel
  • Eliminates drilling and tapping of reservoir surface
  • Eliminates possible heat damage to rubber and loss of vulcanized bond on the motor dampening bars
  • Added motor height for ease of plumbing
  • Order one kit per each set of Dampening bars ordered
  • Each kit contains a set of four pads

 

 

  

  DIMENSIONAL DATA

Model

Number

Use With Motor

Dampening Bar Number

S

T

H

Weight

(per set)

SS-WPD-2

SS-SMB56145, SS-SMB182215

2"

1/2-13NC

1/2"

3 lbs.

SS-WPD-3

SS-SMB254286

3"

1/2-13NC

1/2"

6 lbs.

SS-WPD-4

SS-SMB324405

3"

3/4-10NC

3/4"

8 lbs.

 

The weld pads are designed to weld directly to the reservoir surface to provide tapped mounting holes for the motor dampening bars. This procedure allows the mounting of the motor mount bars without welding directly on the bar or drilling and tapping of the reservoir surface. Any rubber-metal bond can be damaged, with possible separation, if the interface point of rubber and steel reaches a temperature of 500 degree F. Welding adjacent to the rubber-metal interface is virtually impossible without exceeding 500 degree F and precipitating the separation of the rubber-metal bond. Because of the potential separation problem, we insist on welding only the extreme ends of the Motor Dampening Bars. We highly recommend the utilization of the Weld Pad Kit to preclude the possibility of damage to the rubber-metal vulcanization or, more specifically, to completely isolate the rubber-metal interface from the heat of welding.

 

NOTE: Due to product improvement, specifications and price are subject to change without notice.
* All List Prices are in US currency and all shipments are FOB from factory.

Please email saint@saint.com with questions or comments.
Copyright © 1998-2004 Saint Machinery, Inc. All rights reserved.